Journey™ Water Purifier
The AquaDrum™ Water purification system is designed to filter and purify water stored in plastic water storage drums. The typical sizes are 55 gal, 30 gal, and 15 gal. The AquaDrum™ system will adapt to each of these sizes of water storage containers. This unique system does not rely on mechanical pumps which often break quickly and are unreliable. By using air pressure to move water through the purifier, your stored water can be purified and available for use, even if the water is not rotated.
Use any type of air pump to create air pressure
Use on 55 gal, 30 gal, and 15 gal water storage drums
Hydrate up to 50% faster – New technology to stay healthier
Meets EPA micro water purifier standards for removing: 99.9999% of bacteria; 99.99% of virus; 99.99% of parasites (Giardia/Cryptosporidium)
Purifier is independently tested and “End of Life” certified
Each filter purifies up to 250 gallons of storage water
Water tastes fresh and pure
No chemicals used to purify the water
Reduces heavy metals and chemicals: Lead, Fluoride, Pharameuticals, Arsenic, etc.
No moving parts to break or fail
Learn About Our Rigorous Independent Lab Testing
View the full laboratory testing reports on the Journey Water Filter by clicking the on the links below.
There are two different reports.
NOTE: For test purposes this filter was referred to by the lab as the “Sagan Prototype Filter.” It is referred to as the Journey™ Water Filter in our product descriptions. The Journey™ Water Filter is used as part of the XStream™ Water Filter Straw.
NOTE: For test purposes this filter was referred to by the lab as the “Sagan™ Journey™ Efficacy Test”. It is referred to as the Journey™ Water Filter in our product descriptions.
WHY HYDRADYNE TECHNOLOGY IS BETTER FOR YOU
All water has what is known as “surface tension.” This is caused by the molecules which make up water being more densely packed together at the surface due to the stronger inter-molecular forces at work. The dyne level is a way of measuring the surface tension or ‘force’ of water.
Everyday tap water has a surface tension measured in dynes of about 72 dynes. Our cells absorb water at approximately 45 dynes. This means that before our bodies can actually absorb and use the water we take into our systems, it has to expend energy to break down the surface tension from 72 dynes to about 45 dynes.
Due to the ionic properties of the Sagan Life™ Journey™ and DuraFlo™ Filters, the structure of the water is changed, so the surface tension is reduced from say, 72 dynes to approximately 52 dynes. What that means is for your body to absorb the water, it only has to reduce the surface tension by 7 more dynes in order for it to be absorbed into your cells. This reduction in surface tension is what allows you to absorb more nutrients and hydrate up to 50% faster from water which has passed through the Sagan Life™ Journey™ and DuraFlo™ filters. We call this our HydraDyne Technology.
DYNE REDUCTION LAB TEST